Steven82

A friend of mine just put in a new engine in his MY98 classic after it went……. Everything is in and engine is running ok…… just one problem!!

When engaging the clutch pedal and releasing, the pedal only comes up half way--- the rest of the way requires pull up by hand!! Any know what the problem is?

Cheers for your help guys!!

Turbo_T

iTrader: (7)

not done 2 yet but may need bleeding dependin what sort of clucth setup is on the scoob

Jolly Green Monster

iTrader: (4)

did he replace the spring on top of the clutch fork?

Simon

nice guy

Beat me to it JCM. What he said.

Steven82

Spring on top of CLutch folk replaced and bleed.......... any other idears???

Jam Performance

iTrader: (3)

faulty clutch pedal???

Jolly Green Monster

iTrader: (4)

check the amount of free play on the pedal.. you can adjust it at the top of the pedal.. reduce the freeplay and it should pop back up

Simon

Steven82

He Just blead the clutch again and its working fine now .....cheers guys!!

911

I've had this, and the secret seems to be the bleeding.
If you clamp the piston in the slave right down deep and then bleed, it seems ok.

Graham