Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Power FC ECU question

Old Feb 6, 2007 | 04:11 PM
  #1  
Claaarkio's Avatar
Claaarkio
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default Power FC ECU question

Good afternoon,

This may be a stupid question but when you buy an Apexi Power FC ECU for a 1995 WRX does the unit completely replace the standard ECU ?

If the answer is Yes then this leads onto my second question:

Is there any gain in replacing my Version 1 ECU with a Version 2 ECU? I have heard the Version 2 has the abiliby to have chips like the ESL one pushed onto the board rather than soldered?

Cheers

Dave
Reply
Old Feb 6, 2007 | 06:38 PM
  #2  
AFRIKANZ's Avatar
AFRIKANZ
Scooby Regular
 
Joined: Nov 2006
Posts: 602
Likes: 0
From: AKA: GARIYARALLY, on the way to the next stage
Default

Yes, the power fc does replace standard ecu but not sure about your second question.
Reply
Old Feb 6, 2007 | 09:35 PM
  #3  
Scott.T's Avatar
Scott.T
Scooby Regular
iTrader: (2)
 
Joined: Feb 2000
Posts: 6,181
Likes: 1
From: East Sussex
Default

Chips or adaptors can be fitted to any ECU, the most common for this being any Turbo/WRX ECU from 1993 - 1996
Reply
Old Feb 6, 2007 | 10:32 PM
  #4  
Claaarkio's Avatar
Claaarkio
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default

But would it be easier to add a chip from yourself or ESL for instance on the later version 2 ECU? Or is it not really an issue for tuners?

Cheers

Dave
Reply
Old Feb 6, 2007 | 11:43 PM
  #5  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

Not too sure by what you mean on version1 and 2 ecu.
The early ecus were U8,W6 and 2C in the early wrx then replaced by the z4 (which you have i think)
the chip goes into the plastic holder on the bottom right (this is the z4)
the chip goes in the same place but you need a plastic holder which you get with the ESL chip (this is W6,U8,2C)
Reply
Old Feb 7, 2007 | 02:30 PM
  #6  
Claaarkio's Avatar
Claaarkio
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default

Well i assume the ECU's are different, a version 1 - 93 to 95 runs 0.8bar and the version 2 among other things runs 0.9 bar so they must be different?

Dave
Reply
Old Feb 7, 2007 | 02:37 PM
  #7  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

i only know them by number/letter code
WRXs from Nov92 to Aug94 ran the early ecu (2c,u8 and w6) then the z4 came in Sept94
Reply

Trending Topics

Old Feb 7, 2007 | 02:41 PM
  #8  
Claaarkio's Avatar
Claaarkio
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default

Ahh ok, so i guess i am asking, is it worth changing my early ecu (2c,u8 and w6) for the later Z4 when my brother gets his Apexi ecu fitted ?

Dave
Reply
Old Feb 7, 2007 | 02:59 PM
  #9  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

check www.enduringsolutions.com for the chip and what they can do.
Is your brother replacing a z4 with the apexi?If so you may as well put it in your car.
I changed my early ecu for a z4 and its fine (saving up for the apexi though)
Reply
Old Feb 7, 2007 | 03:24 PM
  #10  
classicwrx's Avatar
classicwrx
Scooby Regular
 
Joined: Jan 2007
Posts: 219
Likes: 0
From: At my home
Default

were can you buy the Apexi Power FC ECU for a 1995 WRX from these days and how much for?
Reply
Old Feb 7, 2007 | 03:53 PM
  #11  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

Check out Jolly Green Monster - ECU Mapping (buying,fitting and mapping £750-800).
AndyForrestPerformance (buying,fitting and mapping)
These are just 2 of the people who deal with apexi.
Welcome - Nengun Performance is direct from Japan but takes a few weeks to arrive (buy only)
Reply
Old Feb 7, 2007 | 10:29 PM
  #12  
Claaarkio's Avatar
Claaarkio
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default

Originally Posted by classicwrx
were can you buy the Apexi Power FC ECU for a 1995 WRX from these days and how much for?
My bro got it off ebay, from japan, paid a bit of import duty but was still cheaper than the UK!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
s_tubb23
General Technical
4
Oct 14, 2015 07:58 PM
DogsofWar
Engine Management and ECU Remapping
16
Sep 23, 2015 07:41 PM
aaron_ions
General Technical
1
Sep 17, 2015 10:42 AM
matt12
Engine Management and ECU Remapping
4
Sep 14, 2015 09:36 AM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 04:44 AM.