Newage impreza lightweight bumper beam?
21 January 2007, 05:09 AM
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2002
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Newage impreza lightweight bumper beam?
Greetings from across the pond!
I'm contemplating swapping bumpers beams on my USDM wrx to the EDM beam. I have both the US and JDM bumper beams at home and the US one is a good 25lbs heavier than the JDM beam. Does the UK/EDM wrx use the same "lightweight" bumper beam as the JDM car?
Thanks,
Ben
I'm contemplating swapping bumpers beams on my USDM wrx to the EDM beam. I have both the US and JDM bumper beams at home and the US one is a good 25lbs heavier than the JDM beam. Does the UK/EDM wrx use the same "lightweight" bumper beam as the JDM car?
Thanks,
Ben
22 January 2007, 07:25 AM
#3
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
nope, it uses the same as the US car, i am in the same boat at the moment trying to swap my UK one for a JDM one.
Althoguh rounding one of the bolts off does NOT help!!
Althoguh rounding one of the bolts off does NOT help!!
22 January 2007, 04:04 PM
#4
Scooby Newbie
Thread Starter
Join Date: Mar 2002
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I see. Well thank you very much for your help. Best of luck with that bolt! (A bolt extractor bit from the hardware store and plenty of silicone spray should do the trick).
Ben
Ben
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
