catons scooby

hi, bit of a newby and need help ive got ichy fingers, i need to know how to get 320 bhpish, i have a my99 classic with a ecotek2 chip, hks panel filter, lightweight rcm pulleys, turbo back decat rcm exhust, exdedy organic clutch, running at 271bhp,just wanted to know how to get to 320ish bhp, im going to fit a sti8 intercooler soon, then wanted to know whats needed, but i dont realy wanna change the gear box, any help please thanks,
also i now ill need a full pump are these hard to change do they need to be mapped stright away, how much is a remap,

Shmerman

iTrader: (14)

IMO I would go for ported headers and up-pipe, uprated fuel pump, FPR, a hybrid TD04 (Andy Forrest does these on an exchange basis) and a re-map. That shoud see you good for 320ish as long as you get the intercooler uprated like you said.


There are other ways of getting to your 320ish figure but this is the way I would do it.

catons scooby

thanks

New_scooby_04

iTrader: (4)

Heres how I did it

https://www.scoobynet.com/scoobynet-...xperience.html

Ns04

catons scooby

wow top write up cheers

no1nutter

iTrader: (1)

i enjoyed the read, nice1

Scott.T

iTrader: (2)

With your current setup :
2nd Hand VF24, VF28 or TD05FE £150 - £200
ECUTEK remap £250

= 320BHP at 1.3bar

Damocell

iTrader: (1)

An upgraded fuel pump might help and also a 3 port boost solenoid if you plan to hit 1.3 bar of boost

Damo

catalunya199again

what is 1.3bar in psi im running 21 psi and on the last rolling road hit 320bhp its all well and good getting the bhp but you want the torque to match it as well and i got 313lbs at 4.5k revs on a catalunlya

catons scooby

ok cheers will the gearbox be ok

Damocell

iTrader: (1)

21 psi = 1.45 bar

Damo

New_scooby_04

iTrader: (4)

Get it mapped sympatetically, treat it with respect and chances are you'll be ok if it's a good un.

Ns04

Damocell

iTrader: (1)

Or you could change the gearbox to an STI 5, thats what I have done, seems to have better ratios as well!

Bit of an expensive option though

Damo

catons scooby

ok thanks every1 also if i get a walbro pump ie sat, do i need a remap straight or can i get away with it for a few months cheers

Wurzel

iTrader: (1)

I have an MY00 Classic with the following:

Decat ScoobySport Downpipe
Decat resonated Prodrive mid pipe
Power Engineering T75 backbox
Perrin crank pulley (500 grams)
MRT Flywheel (3.5kg)
3 Port Boost Solonoid
Walbro 285 fuel pump
VF24 Turbo
Samco Water Hoses
FMIC
APS Cold Air Induction Kit
MY97/98 recirc Dump Valve
Bob Rawle ECU Remap

All this equates to 359bhp according to Bobs Laptop on a 3rd gear run then 4th gear run.

HTH
Steve