Rear Roll Bar Bushes.
22 December 2006, 08:19 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
Rear Roll Bar Bushes.
Hello again all.
I am changing my worn bushes on the rear roll bar today, the 'C' shaped ones. Can anyone explain the easiest way to do this so I don't end up wasting my valuable time and losing skin from my knuckles?
Thanks again.
Dan.
I am changing my worn bushes on the rear roll bar today, the 'C' shaped ones. Can anyone explain the easiest way to do this so I don't end up wasting my valuable time and losing skin from my knuckles?
Thanks again.
Dan.
22 December 2006, 08:40 AM
#2
Scooby Regular
Join Date: Nov 2006
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I had mine on a ramp, but most people back their car onto floor standing ramps, you can easily reach them. The key is that the suspension needs to be equal otherwise the anti roll bar will be flexing and make it difficult/impossible to do. Nut and a bolt on each, 12mm and 14mm spanners are only tools required.
Nicky
I had mine on a ramp, but most people back their car onto floor standing ramps, you can easily reach them. The key is that the suspension needs to be equal otherwise the anti roll bar will be flexing and make it difficult/impossible to do. Nut and a bolt on each, 12mm and 14mm spanners are only tools required.
Nicky
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM