TD05/06-20G vs Turbodynamics MD195S
12 December 2006, 03:13 PM
#1
Scooby Regular
Thread Starter
TD05/06-20G vs Turbodynamics MD195S
TD05/06-20G vs Turbodynamics MD195S
Hi there,
Just interested to know what (if) differences there are between the 2 turbos.
Do they produce equal (ish) power/torque
Does the MD suffer from the surge/stall problems of the 20G ?
Any advice welcome please
Hi there,
Just interested to know what (if) differences there are between the 2 turbos.
Do they produce equal (ish) power/torque
Does the MD suffer from the surge/stall problems of the 20G ?
Any advice welcome please
12 December 2006, 04:57 PM
#2
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
if your asking whether you shoudl swap yours for it mark then no.....theres no point.
The 195 doesnt suffer from surge though to answer your Q
TD would claim that the 195 can do over 400, and maybe a few have.....but only as many as 20gs have...
The compressor is rated to around 40lb/min, and the 20g is 44lb/min to technically speaking the 20g can flow slightly more air.
The 195 doesnt suffer from surge though to answer your Q
TD would claim that the 195 can do over 400, and maybe a few have.....but only as many as 20gs have...
The compressor is rated to around 40lb/min, and the 20g is 44lb/min to technically speaking the 20g can flow slightly more air.
12 December 2006, 07:51 PM
#3
Scooby Regular
I have put 3 MD195s turbo's on cars this year...
One made 391.1hp the second made 401.3 and the third is in the middle of mapping..So far 366 @ 1.2 bar...
One made 391.1hp the second made 401.3 and the third is in the middle of mapping..So far 366 @ 1.2 bar...
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
57
05 February 2016 05:23 PM