punto_gt

iTrader: (1)

i fitted my scoobyecu about 3-4 days ago into my 1995 import wrx, the car has been running fine with it, this morning i put my foot down and the car seems to have started cutting when the turbo kicks in at higher revs, now i have a cel light on permanantly any suggestions. z4 ecu tdo5

james-wrx

First thing to try and get the fault code, i think you plug the two black connectors into each other (they are under the dash) then turn the ignition on, the cell light should flash the code to you one long flash means 10 i think and the short flashes indicate 1 for one flash and 2 for 2 and so on, post the code up here and im sure somebody who knows what they are doing will tell you what it means !
I could be wrong about the fault codes so I stand to be corrected !

punto_gt

iTrader: (1)

ok mate thanks ill go have a try.

punto_gt

iTrader: (1)

ok im getting 1 long flash, then 4 little flashes, so i take it code 14 ?

myblackwrx

iTrader: (1)

Main Heading Goes Here

hth

james-wrx

Injector No 2