Problems with rear Brembo Brakes
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Problems with rear Brembo Brakes
Got a set of STi front and rear brakes (calipers as well as discs) and was told that the front ones would fit on with no problems, but the rear discs are bigger on the STi (where the housing for the rear handbrake is).
Has anyone had this problem as well or is there a simple solution?
Brakes are off a 03 STi and going on a 03 WRX
Has anyone had this problem as well or is there a simple solution?
Brakes are off a 03 STi and going on a 03 WRX
#3
Scooby Regular
iTrader: (2)
I believe the Caliper will fit straight onto the rear mountings of an 01> WRX and will be offset to suite the Sti 316mm disk. But you will need to sleeve the drum of the STi disk down to 170mm from 190mm.
The following link is for a classic, but should give you the idea.
https://www.scoobynet.com/wheels-tyr...ront-rear.html
The following link is for a classic, but should give you the idea.
https://www.scoobynet.com/wheels-tyr...ront-rear.html
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM