knock and pressure sensor problem
18 October 2006, 07:47 PM
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2006
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
knock and pressure sensor problem
hi all
could you please help , i have just done a cel check and it has come back with code 22 (knock sensor) and code 45 (pressure sensor / pressure exchange solenoid valve) .
firstly what the f**k is a pressure sensor / pressure exchange solenoid valve and what do they cost.
secondly , could these faults be down to the fact that i am know running v power
any help please guys
forgot to say its a 94 m uk classic turbo
could you please help , i have just done a cel check and it has come back with code 22 (knock sensor) and code 45 (pressure sensor / pressure exchange solenoid valve) .
firstly what the f**k is a pressure sensor / pressure exchange solenoid valve and what do they cost.
secondly , could these faults be down to the fact that i am know running v power
any help please guys
forgot to say its a 94 m uk classic turbo
18 October 2006, 08:13 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
pressure exchange solenoid sits on the drivers inner wing.. along with the boost control solenoid and the map sensor.. check it is plugged in..
I'd reset the ecu and see if they come back.
Simon
I'd reset the ecu and see if they come back.
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM