I/C spray from washer bottle
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Welcome home; Keano, Defoe & Chimmy...
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
I/C spray from washer bottle
Anyone done this mod on a newage (or classic i suppose)
Whats involved- parts? fitting?
I was considering sourcing a rear washer motor/pump from a wagon because this will plug straight in the already fitted washer bottle- running a switch into the dash and sourcing an I/C switch (or any subaru switch i suppose!!)
Anyone see difficulties from this
Where could i get a wiring diagram to find out what cable to power the washer pump?
I have a zerosports splitter which already has waterspray connections
Any ideas help greatly appreciated
Trevor
Whats involved- parts? fitting?
I was considering sourcing a rear washer motor/pump from a wagon because this will plug straight in the already fitted washer bottle- running a switch into the dash and sourcing an I/C switch (or any subaru switch i suppose!!)
Anyone see difficulties from this
Where could i get a wiring diagram to find out what cable to power the washer pump?
I have a zerosports splitter which already has waterspray connections
Any ideas help greatly appreciated
Trevor
#2
Scooby Regular
Join Date: Sep 2002
Location: midlands
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
I started out with this method. using the headlamp wash redirected to the IC. this was on a classic. problem was couldn't put screen wash in bottle as not good for IC. then I sourced a spare washer bottle and mounted it in the boot. wiring was easy. took a live to a switch then to pump from pump to earth. used a s/hand fog light switch and removed little spring inside of switch to stop it staying permanatey on
ken
ken
#5
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Welcome home; Keano, Defoe & Chimmy...
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scooby-k
I started out with this method. using the headlamp wash redirected to the IC. this was on a classic. problem was couldn't put screen wash in bottle as not good for IC. then I sourced a spare washer bottle and mounted it in the boot. wiring was easy. took a live to a switch then to pump from pump to earth. used a s/hand fog light switch and removed little spring inside of switch to stop it staying permanatey on
ken
ken
Of course screen wash!!
I spoke to someone saturday they said to get the proper IC spray bottle in they had to remove the driveshaft- dont fancy that- the actual wiring was easy then?
Trevor
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM