Newage Idle Control Valve
#1
Newage Idle Control Valve
My 2003 WRX has problems idling. Its fluctuates and then has problems driving. Is there a particular way to clean the ICV? I have used carb cleaner and lightly oiled it too (WD40).
When I clean the ICV, the car idles fine for a few days. Then engine light comes back on with the dodgey idle (and error code) - usually after firing up the car in the mornings.
I originally had a engine light on because of the MAF (MAF low error code). So, I replaced the MAF sensor catridge (recently bought from BR Dev). Then I had this new error code for the ICV.
Any help will be much appreciated.
regards,
Sozster
When I clean the ICV, the car idles fine for a few days. Then engine light comes back on with the dodgey idle (and error code) - usually after firing up the car in the mornings.
I originally had a engine light on because of the MAF (MAF low error code). So, I replaced the MAF sensor catridge (recently bought from BR Dev). Then I had this new error code for the ICV.
Any help will be much appreciated.
regards,
Sozster
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
supshon
General Technical
2
03 October 2015 08:06 PM