whats the easiest way to instal oil press and temp gauges in a 94 jdm impreza and anyone know if there is a gauge pod for the sterring column cheers

 

Easiest way would be to use a sandwich plate to house the senders.
http://www.scoobyworld.co.uk/catalog...093581da8c0510

Proper way is to locate the oil pressure sender in place of the original under the alternator, and using a block adaptor, fit the oil temp in the blanked off plug above the No3 cylinder under the intercooler. Its a right b@stard to remove, 8mm allen key socket needed.