Inlet manifolds
10 April 2006, 07:31 AM
#1
Scooby Senior
Thread Starter
Join Date: Nov 2005
Location: In the workshop or under some one elses car. PROJECT RA 09 IS GO.
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Inlet manifolds
Can any one tell me what the differance is between the phase 1.5 and phase 2 inlet manifolds is, (looking to reverse mine when i go fmic), please.
John
John
10 April 2006, 10:18 AM
#2
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
The dimensions for the mounting holes are different, so they are not interchangable.
So you cannot directly fit a ph 1.5 manifold to a ph2 head, or vica versa. I think you can get adaptors but I'm not sure.
So you cannot directly fit a ph 1.5 manifold to a ph2 head, or vica versa. I think you can get adaptors but I'm not sure.
10 April 2006, 01:29 PM
#3
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
not interchangeable at all without a lot of aggro. The phase 2 engines have the head ports spaced 15mm further apart across the engine, as well as a different bolt pattern. Idle valve isn't compatible either way too.
10 April 2006, 04:33 PM
#4
Scooby Senior
Thread Starter
Join Date: Nov 2005
Location: In the workshop or under some one elses car. PROJECT RA 09 IS GO.
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info, phase 2 it is then, need to find one so i can start moding it.
John
John
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM