Electric connections for Defi gauges in type R V5
#1
Electric connections for Defi gauges in type R V5
Can anyone please advise me on which wires to connect into for the Defi Gauges, I have all the instructions which say the +12V for illumination etc.
The manual says to connect to:
red - battery
Orange - IGN
White - illumination
Black - GND
White wires did you connect to? There are load of em at the back of the stereo and lamps on the cig lighter and ash tray. I found a red wire on the back of the stereo which is 12V when the ingition is on, so i assume i could connect this to the red wire from the gauges? Im a bit stuck on the others.
Thanks for any advice.
The manual says to connect to:
red - battery
Orange - IGN
White - illumination
Black - GND
White wires did you connect to? There are load of em at the back of the stereo and lamps on the cig lighter and ash tray. I found a red wire on the back of the stereo which is 12V when the ingition is on, so i assume i could connect this to the red wire from the gauges? Im a bit stuck on the others.
Thanks for any advice.
#2
Scooby Senior
Join Date: Feb 2003
Location: West Midlands
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Permanent live = red (connection) you should find this live via your hazard switch.
Ign = live (you have just found this wire from your stereo)
illumination = orange ( I used the live wire which feed the ashtray illum buld)
gnd = black (I just connected it to the metal car body)
Get you self a simple tester. It should help you find the correct wires.
Ign = live (you have just found this wire from your stereo)
illumination = orange ( I used the live wire which feed the ashtray illum buld)
gnd = black (I just connected it to the metal car body)
Get you self a simple tester. It should help you find the correct wires.
Thread
Thread Starter
Forum
Replies
Last Post