help with fault codes
#1
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
hi,k ive just done a fault code check on my ecu and it has come up with 5 long one short and four long three short. iv elooked this up and from what i can see it is saying inhibuter switch (my car is a manual) and throttle switch.
i have just done a rebuild on it and the ar was running fine before i started and now it has a big flat spot around 1000-2000 rpm. could anyone point me in the right direction? thanks.
i have just done a rebuild on it and the ar was running fine before i started and now it has a big flat spot around 1000-2000 rpm. could anyone point me in the right direction? thanks.
![Ponder2](https://www.scoobynet.com/images/smilies/ponder2.gif)
#4
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
![Ponder2](https://www.scoobynet.com/images/smilies/ponder2.gif)
any ideas wat coursed this
![Ponder2](https://www.scoobynet.com/images/smilies/ponder2.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM