Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Cost to color code door mirrors

Thread Tools
 
Search this Thread
 
Old Oct 18, 2001 | 09:28 AM
  #1  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Question


Anyone know how much I may be looking at to color code my door mirrors and door handles, and those damn orange grills in the front spoiler ?

Also how the hell do they come out ?

T.
Reply
Old Oct 18, 2001 | 10:09 AM
  #2  
ScoobyJawa's Avatar
ScoobyJawa
Scooby Regular
 
Joined: Aug 2001
Posts: 10,954
Likes: 0
From: Hampshire
Post

Trumble,

Mirrors and handles is around 200-300 quid I think, got a quote to de-lock the car, and colour code handles, sideskirts, rear bumper trim and mirrors for around 350 through a mate

As for the orange bits, unscrew your indicator and remove and then just pop the little grill bit out from behind Better than scratching your paint using a screwdriver to pop it out
Reply
Old Oct 18, 2001 | 10:14 AM
  #3  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Post


Thanks m8 I'll have a shop round - would any body shopy beable to match the DGM color I have ?

Reason is I want some clear indicators (font and side) and thought the orange grill makes them look a bit pants.

T.
Reply
Old Oct 18, 2001 | 12:56 PM
  #4  
carl's Avatar
carl
Scooby Regular
 
Joined: May 1999
Posts: 7,901
Likes: 0
Post

Just find a colour that's close from Halfords -- they're recessed anyway so no-one will notice the slight difference.
Reply
Old Oct 18, 2001 | 06:31 PM
  #5  
DaveMcC's Avatar
DaveMcC
Scooby Regular
 
Joined: Jul 2001
Posts: 215
Likes: 0
Post

I got my orange vents colour coded DGM by a local bodyshop for £30. The match isn't perfect but cause they're recessed you can't tell.

Dave
Reply
Old Oct 18, 2001 | 10:59 PM
  #6  
ChrisB's Avatar
ChrisB
Moderator
 
Joined: Dec 1998
Posts: 23,573
Likes: 0
From: Staffs
Post

I got those naff orange bits out by grabbing with some pliers and just pulling - came out no trouble. They are black underneath so I stripped them down with thinners and then sprayed them black.

Mucho improvement.

ChrisB.
Reply
Old Oct 19, 2001 | 08:34 PM
  #7  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Thumbs up


Looks like its a trip to Halfords this weekend with my DGM touch up paint.

Thanks All.

T.
Reply
Old Oct 19, 2001 | 08:36 PM
  #8  
catflap's Avatar
catflap
Scooby Regular
 
Joined: Sep 2001
Posts: 1,322
Likes: 0
Post

whats the DGM paint? and how is it going to be on the softer plastic bits?
Reply
Old Oct 20, 2001 | 01:35 PM
  #9  
FASTER MIKE!!'s Avatar
FASTER MIKE!!
Scooby Regular
 
Joined: Sep 2001
Posts: 4,042
Likes: 0
From: www.cumbrianscoobs.co.uk/bbs
Question

has anyone sprayed their mirror`s them self with an aerosol can of paint? what`s the colour match like? i`ve been thinking about doing the job my self aswell as the side skirts and rear bumper extentions so would be interested in finding out the end results.
Reply
Old Oct 20, 2001 | 09:54 PM
  #10  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Post

Well I went into my local halford looking for the closest DGM (64c) I could find - got really worried when the nearest was Daewoo!

Anyways, I went over for a chat with the blokes at that nice long counter they have infront of all those things you never really want and asked "can you order paint for a subaru ?"

Oh yes we can even make it up on the spot ! I nearly fell over ! They can put it into into aerosols - skeptic but none the less for 8 quid I thought lets give it a go.

So producing touch up pencil with color code on they made a note of the code and I went to B&Q !

Came back an hour later and they showed me the color - looked perfect match to me - only thing was they mixed too much (half a litre!) - shame - so they gave it me anyways as they would chuck it out !

The grills are now off and I have washed / scrubbed them - I'll clean them with thinners tomorrow and start to paint them.

Anyone know once I have got the color on should I give them some coats of clear lacquer ?

I'll post some picks when I get done.

T.

[Edited by Trumble - 10/21/2001 9:12:53 AM]
Reply
Old Oct 21, 2001 | 12:53 PM
  #11  
carl's Avatar
carl
Scooby Regular
 
Joined: May 1999
Posts: 7,901
Likes: 0
Post

I just cleaned mine with soapy water, did four coats of silver (I've got a silver car, obviously) left overnight then two coats of clear lacquer. You have to spray from quite a few angles to get in between the slats.
Reply
Old Oct 21, 2001 | 03:48 PM
  #12  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Post

Took them right back to the black plastic - then sprayed 4 coats of platic primer. So far 3 coats of DGM and I still havent filled all the bottoms of the grooves.

After a couple more coats I'll bung them in the airing cupboard overnight - then it'll be the lacquer tomorrow.

T.

[Edited by Trumble - 10/21/2001 3:49:06 PM]
Reply
Old Oct 22, 2001 | 11:22 PM
  #13  
catflap's Avatar
catflap
Scooby Regular
 
Joined: Sep 2001
Posts: 1,322
Likes: 0
Talking

How hard is it to get the door handles out? do you have to do something to the locks or can they just be unscrewed?? would like to do them too
Reply
Old Oct 23, 2001 | 12:34 PM
  #14  
TonyG's Avatar
TonyG
Scooby Regular
 
Joined: Jun 2001
Posts: 5,043
Likes: 0
From: The dark side of the Sun and owner of 2 fairy tokens
Post

I got my orange triangle thingys out with a coathanger. Handy hint - if doing this, stick masking tape over the paintwork surrounding them to prevent scratches. Best paint match I found was at the local model shop - Tamiya 'Telefonica Blue' metallic matches very well to Deep Blue Mica. Wouldn't recommend using it for door mirrors/handles though.
Reply
Old Oct 25, 2001 | 01:10 AM
  #15  
Timo's Avatar
Timo
Scooby Regular
 
Joined: Apr 2001
Posts: 451
Likes: 0
Angry

Wot r u talking about lads!! DONT EVEN GO THERE!

Colour coding door handles and mirrors with cans of paint from halfords!! Oh dear ... please get a grip!!

and as for the 200 to 300 hundred quid, well if you drive up to my place with £150 and take ya missus shopping for a couple of hours youll come back to colour coded parts,

dont ruin ya scooby with crappy aerosols!!

Tim
Reply
Old Oct 25, 2001 | 07:49 PM
  #16  
catflap's Avatar
catflap
Scooby Regular
 
Joined: Sep 2001
Posts: 1,322
Likes: 0
Post

Hay timo, if i pop upo to see you with 150 quid will YOU take my misses shopping for me ARRGGG PLKASE ILL PAY YOU FOR HER hehehe

is that 150 for all the bitrs? skirts side and back and handles and mirrors dude?
Reply
Old Oct 27, 2001 | 09:20 AM
  #17  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Thumbs up


Would have to say now those horid orange things are colored green - looks a whole lot better - the color is a little light but hardly noticeable.

Certainly wouldnt consider using the spray cans for the mirrors but had the paint been a spot on match would have used it to do the mirrors and door handles - as it is I wont but cant complain as the whole thing only cost a tenner including the thinners to strip the paint off in the first place.

Most pleased.

T.
Reply
Old Oct 27, 2001 | 04:05 PM
  #18  
GW2000's Avatar
GW2000
Scooby Regular
 
Joined: Aug 2001
Posts: 300
Likes: 0
Post

Trumble - Would be interested to see a picture of your motor with the grills sprayed DGM. I'm also thinking of doing the clear lenses on for the front and side indicators as well.

Ian
Reply
Old Oct 29, 2001 | 07:40 PM
  #19  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Post


Have some pics but cant find info on how to embedd in the forum looks like the faq has gone west following the upgrade !

Anyone know how ?

T.
Reply
Old Oct 29, 2001 | 10:54 PM
  #20  
necromax's Avatar
necromax
Scooby Regular
 
Joined: Sep 2001
Posts: 372
Likes: 0
Post

Anyone know of anyone who would colour code door handles and respray one of my door mirrors (someone was a bit close passing my car), in the North Shropshire/North Wales area ? For a reasonable sum of course!
Reply
Old Oct 30, 2001 | 06:08 PM
  #21  
Trumble's Avatar
Trumble
Thread Starter
Scooby Regular
 
Joined: Jun 2001
Posts: 1,271
Likes: 0
From: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Cool

Heres a pic of the two sides of the front bumper.



My m8 is going to do the mirrors for me as he has all the gear. More images comming in a couple of weeks.

T.

[Edited by Trumble - 10/30/2001 7:02:12 PM]
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM




All times are GMT +1. The time now is 06:25 AM.