ok, ive just managed to get a z4 ecu. now all i need to now is, what sort of chip would change the speed limitor & change the fuel from 100ron too 97ron. , any ideas and prices would be good. + if there are any problems in doing this.. thanks guys

 

upsss, for got to add e-mall reply..wouldent now if i have posts

 

has anyone any ideas?

 

Is the Z4 the Phase 1 or 2 ECU?

 

just get the existing ecu remapped - there are plenty of guys in here that can point you in the right direction. Give TSL (Keyworth) a call - they are local to you and should be able to help. www.tsl-motorsport.co.uk

 

the ecu carn't be remaped. its for 93/96. four plug one. i wish it was that easy. but for a standard ecu, its the daddy ive been told. thanks anyway

 

sorry matty, phase 1/2. is this the injectors ect. its for upto 96, four plug type.

 

So it can't be Apexi'd then? If so why have you fitted it?

 

http://www.andyforrestperformance.co.uk/16253.html

 

i was going to get the apexi fc, but im a little tight on the cash flow. so i got this z4. with its higher psi and map. perfect, in a way that is. realy its just the speed limitor thats the problem. some one was on about a chip which sorts this type of thing out. carnt remember who. thanks for ya help.

 

The speed limiter is done with a cable adaptor and not an ecu chip

http://cgi.ebay.co.uk/impreza-evo-sp...QQcmdZViewItem

 

thats only if you have a jap car. if you use a jap ecu on a uk car the limitor is still on the ecu. theres some sort of sencer on the cable some were. i had a jap ecu before and used to cut out at the 112mph. lookerly, the older scoobs have a port for a chip ect in/on the ecu bourd.

 

is there a chip which will just change the fuel & the speed limitor, and how much. i now i carn't remap this ecu. the only option is a chip of somr sort.

 

Really? - Inside the ECU there is a chip holder(28pin)/space allocated for a holder where a 27C1028 chip can be fitted which 'can be mapped' or can be fitted with a variant to the single chip in a board form which 2 chips - these can be custom mapped

Cheers

 

thanks, this is what im after. wheree can i get this type of chip, & have you a price. if it keep the standard map but can be slightly changed. thats for me... nise one

 

Keep an eye on Ebay in a week or 2

 

why is some one you now putting one on, anyways. will do..