HKS Dump valve- which way?
23 January 2006, 05:52 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2002
Location: West Sussex-Scoob stripped :( Hello Audi A6 4.2V8 Quattro :)
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
HKS Dump valve- which way?
If I want to tighten the spring as tight as possible what way should the nut at the back go?
Should it tighten clockwise towards the dump valve, or anti clockwise away from the valve to the point it almost comes out?
My boost levels seem to make it leak, so I need get it as tight as possible and take it from there.
Cheers Kevin
Should it tighten clockwise towards the dump valve, or anti clockwise away from the valve to the point it almost comes out?
My boost levels seem to make it leak, so I need get it as tight as possible and take it from there.
Cheers Kevin
23 January 2006, 08:39 PM
#3
Scooby Regular
Thread Starter
Join Date: Dec 2002
Location: West Sussex-Scoob stripped :( Hello Audi A6 4.2V8 Quattro :)
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Originally Posted by Blue94WRX300
You need to make the screw go in so that the spring is being compressed, therefore making it stiffer to hold more boost.
So you need to turn it clockwise...
Cheers,
Kim.
So you need to turn it clockwise...
Cheers,
Kim.
Thankyou Kim
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM