Wrong injectors or wrong adaptor kit?
29 December 2005, 11:13 AM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2001
Location: Finland
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Wrong injectors or wrong adaptor kit?
I'm replacing my 480cc injectors with some Nismo's using one of Carl Davey's adaptor kits, but either the kit is wrong or the injectors, cause they won't fit... 
Please check the pics here and let me know what you think, my car is a european MY98.
Note that there are no o-rings on the injectors, I just put them in the fuel rail so I could see how deep they _could_ go. On pic number 6 there is no adaptor on the injector, that's why it's so deep in.
http://subaru.1g.fi/kuvat/Miki/
The car is in the workshop awaiting the proper parts, HELP !!!!
Please check the pics here and let me know what you think, my car is a european MY98.
Note that there are no o-rings on the injectors, I just put them in the fuel rail so I could see how deep they _could_ go. On pic number 6 there is no adaptor on the injector, that's why it's so deep in.
http://subaru.1g.fi/kuvat/Miki/
The car is in the workshop awaiting the proper parts, HELP !!!!
29 December 2005, 12:44 PM
#2
Scooby Regular
Thread Starter
Join Date: Dec 2001
Location: Finland
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Problem most probably found, I have the wrong set of o-rings. Just added a couple of new pics completely without the brown o-ring, looks a lot better now. 
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM