washing i/c
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: using lots of petrol
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
washing i/c
going to fit a catch tank to the breathers as i am getting a lot of oil comming
out of the vta.
would it be ok to remove the i/c & wash it out with gunk etc as there is oil in there too
thanks chris
out of the vta.
would it be ok to remove the i/c & wash it out with gunk etc as there is oil in there too
thanks chris
#2
That would do it, but I used to use petrol and leave it to stand a while then swill it about and drain off.
Leave to dry for an hour or so.
Once you have done the vent tank mod you won't need to do it again.
Graham.
Leave to dry for an hour or so.
Once you have done the vent tank mod you won't need to do it again.
Graham.
#4
Bit naughty on the environment too! but I think gunk will leve a residue in the narrow tube pack of the IC.
I left an air line gently blowing through the IC to ensure all was evaporated.
Graham.
I left an air line gently blowing through the IC to ensure all was evaporated.
Graham.
Thread
Thread Starter
Forum
Replies
Last Post
oilman
Trader Announcements
15
01 October 2015 11:55 AM