Would 440 injectors be to big?
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Would 440 injectors be to big?
As above, i have a 93 wrx ra import i am about to fit a Scott taylor chip, Full de-cat System from turbo down, K&N panel filter and a Walbro 255 pump. Do i need the 440's or not.
Cheers oh wise ones
Cheers oh wise ones
#4
Scooby Regular
If the chip is plug and play leave the injectors alone.
The map on the chip was designed for 380 inj's
Turbo will be a TD05, VF22 or 23 (I forget what was fitted when)
Look on the Compressor cover, where the intake is from the filter comes in. It should be cast in/stamped there
The map on the chip was designed for 380 inj's
Turbo will be a TD05, VF22 or 23 (I forget what was fitted when)
Look on the Compressor cover, where the intake is from the filter comes in. It should be cast in/stamped there
#6
Former Sponsor
iTrader: (48)
380s will see up to around 300bhp at normal fuel pressure with all supporting mods so unless you are going for more power, why go to the expense and hassle of changing them. If, like Dyney says, the chip is meant for 380 cc injectors then it would be a BAD move. Just confirm that with Scott.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM