Fitting harness & retaining stock seatbelt..
#1
Scooby Regular
Thread Starter
Fitting harness & retaining stock seatbelt..
Would like to fit a 3 maybe 4 point harness for track days, is it possible to retain the stock seatbelt and have both fitted?
Having fitted a 3 point harness to an old golf two of the stock points were used and a new mount fitted in the chassis just behind the seat..
I.e. harness a pain day to day.. so I'd tuck the harness out of the way...
Any pics out there in scooby land and examples?
Only the cutting a hole bit worries me...
Cheers
Having fitted a 3 point harness to an old golf two of the stock points were used and a new mount fitted in the chassis just behind the seat..
I.e. harness a pain day to day.. so I'd tuck the harness out of the way...
Any pics out there in scooby land and examples?
Only the cutting a hole bit worries me...
Cheers
#2
Easy.
I had the same set-up on my car before the racing seat went in (much better than the stock seat)
The two straps over the shoulders locate to the raer seat belt fixings.
The strap to the right (door side) bolts to the ORIGINAL belt anchor bolt (!) and the left strap adjacent to the trans tunnel locates using the seat frame bolt.
All this passed MSA scruitineering for 2 years no probs.
Graham.
I had the same set-up on my car before the racing seat went in (much better than the stock seat)
The two straps over the shoulders locate to the raer seat belt fixings.
The strap to the right (door side) bolts to the ORIGINAL belt anchor bolt (!) and the left strap adjacent to the trans tunnel locates using the seat frame bolt.
All this passed MSA scruitineering for 2 years no probs.
Graham.
#3
Scooby Regular
Thread Starter
Originally Posted by 911
Easy.
I had the same set-up on my car before the racing seat went in (much better than the stock seat)
The two straps over the shoulders locate to the raer seat belt fixings.
The strap to the right (door side) bolts to the ORIGINAL belt anchor bolt (!) and the left strap adjacent to the trans tunnel locates using the seat frame bolt.
All this passed MSA scruitineering for 2 years no probs.
Graham.
I had the same set-up on my car before the racing seat went in (much better than the stock seat)
The two straps over the shoulders locate to the raer seat belt fixings.
The strap to the right (door side) bolts to the ORIGINAL belt anchor bolt (!) and the left strap adjacent to the trans tunnel locates using the seat frame bolt.
All this passed MSA scruitineering for 2 years no probs.
Graham.
Just got my Group B MSA... BTW... downhill from here on in then...
#5
Yep, both there at the same time. no probs.
Remember to get your B license signed after each meeting to get your A grade, makes all the difference to the events you can enter.
You are now done for
Got to go...
http://jusspress.com/day.php?userid=...entTime=131625
Graham
Remember to get your B license signed after each meeting to get your A grade, makes all the difference to the events you can enter.
You are now done for
Got to go...
http://jusspress.com/day.php?userid=...entTime=131625
Graham
Last edited by 911; 08 October 2005 at 08:21 AM.
#6
Scooby Regular
Thread Starter
Originally Posted by tweenierob
Yes it does mate, also had both installed on mine at the same time using the mounting points graham has posted.
Rob
Rob
#7
Scooby Regular
Thread Starter
Originally Posted by 911
Yep, both there at the same time. no probs.
Remember to get your B license signed after each meeting to get your A grade, makes all the difference to the events you can enter.
You are now done for
Got to go...
http://jusspress.com/day.php?userid=...entTime=131625
Graham
Remember to get your B license signed after each meeting to get your A grade, makes all the difference to the events you can enter.
You are now done for
Got to go...
http://jusspress.com/day.php?userid=...entTime=131625
Graham
Trending Topics
#9
Some quick pics for you:
There, hope that works.
Note the small cable ties through the sprung clip fingers. If you do not fit these or use split-pins you could be stopped from racing! (I learnt the hard way )
Graham
There, hope that works.
Note the small cable ties through the sprung clip fingers. If you do not fit these or use split-pins you could be stopped from racing! (I learnt the hard way )
Graham
#10
Scooby Regular
Thread Starter
Originally Posted by 911
Some quick pics for you:
There, hope that works.
Note the small cable ties through the sprung clip fingers. If you do not fit these or use split-pins you could be stopped from racing! (I learnt the hard way )
Graham
There, hope that works.
Note the small cable ties through the sprung clip fingers. If you do not fit these or use split-pins you could be stopped from racing! (I learnt the hard way )
Graham
Thread
Thread Starter
Forum
Replies
Last Post
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
HEL Performance
Car Parts For Sale
28
13 October 2015 07:36 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM