Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Engine troubles

Thread Tools
 
Search this Thread
 
Old Oct 6, 2005 | 10:45 PM
  #1  
hall84's Avatar
hall84
Thread Starter
Scooby Regular
 
Joined: Oct 2005
Posts: 126
Likes: 0
From: Wirral
Default Engine troubles

Hi guys, seem to have a big problem with my 99 scoob. on the way home from work the other day i noticed smoke coming out the exhaust. Managed to get home but by this time my whole road was filled with smoke. Switched the engine of and noticed smoke coming out from under the bonnet and around the turbo area. Wen i try and the start the car it cranks over like it has low compression then fires up and procedes to throw huge plums of smoke out the back. At idle it seems to be mis fireing but wen the revs are brought up slightly the mis fire seems to clear. Oil was changed about a week ago and the level is now on the min of the dip stick.

Any insight into wat the problem might be would be appreciated
J
Reply
Old Oct 6, 2005 | 11:22 PM
  #2  
New_scooby_04's Avatar
New_scooby_04
Moderator
iTrader: (4)
 
Joined: Jul 2004
Posts: 18,687
Likes: 0
From: The Terry Crews of moderation. P P P P P P POWER!!
Default

Oh no, that doesn't sound good mate- Give David at API Engines a ring- he's a scooby engine specialist. http://www.apiengines.com/index3.php I hope it's not a melted piston!

Good luck.

NS04
Reply
Old Oct 7, 2005 | 08:16 AM
  #3  
stockcar's Avatar
stockcar
Scooby Regular
20 Year Member
Liked
Loved
 
Joined: Mar 2002
Posts: 6,831
Likes: 424
From: north east
Default

as above i would suspect a cracked/damaged ring or more likely a melted piston??

you may be lucky and it could be a turbo oil seal, you would need a compression test as a min. to diagnose for defo

alyn
Reply
Old Oct 7, 2005 | 10:29 AM
  #4  
APIDavid's Avatar
APIDavid
Former Sponsor
iTrader: (4)
 
Joined: Jul 2003
Posts: 6,377
Likes: 3
From: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Default

Thanks for that NS04.

Sounds like a melted pistone from the description although Alyn is correct it could be a seal in the turbo. On a scale of ten more likely to be piston.

hall84 If you are anywhere near us at junction 12 of the M40 we can take a look see and advise or you can call me for a no nonsense / no obligation chat.

Good Luck David APi Engines / APi Impreza
www.apiengines.com
Reply
Old Oct 7, 2005 | 11:04 AM
  #5  
tweenierob's Avatar
tweenierob
Scooby Regular
 
Joined: Mar 2002
Posts: 4,338
Likes: 0
From: Fcon Power Writer
Default

There seems to be a large number of TD04's with damaged seals at the moment, i have changed 4-5 in the last two months.
Exact symptoms.

Take one of the cam breathers off and see how much pressure is coming out of the cover..

Rob
Reply
Old Oct 7, 2005 | 11:18 AM
  #6  
harvey's Avatar
harvey
Former Sponsor
iTrader: (48)
 
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
Default

Where are you located.
Reply
Old Oct 7, 2005 | 05:30 PM
  #7  
hall84's Avatar
hall84
Thread Starter
Scooby Regular
 
Joined: Oct 2005
Posts: 126
Likes: 0
From: Wirral
Default

well i hope its only a turbo problem and not a piston problem. surely if it was a melted piston the car wouldnt run??? im on the wirral. anyone know of any scooby specialists in the area?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
kenc
Wanted
6
Oct 2, 2015 09:12 PM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM




All times are GMT +1. The time now is 07:43 AM.