Advice
What injectors are they?
Are they new or used?
If used - Have you had them ultrasonically cleaned, and the spray pattern and flow rate checked.
If the spray pattern is bad, you will experience prolems with idling.
Richard
Are they new or used?
If used - Have you had them ultrasonically cleaned, and the spray pattern and flow rate checked.
If the spray pattern is bad, you will experience prolems with idling.
Richard
Scooby Regular
Joined: Sep 2000
Posts: 31
Likes: 0
From: Kuwait
You need new ECU I advice to you is ECUTEK its can control the 550cc even the 650cc but not higher
-----------------------------------------------------------------------------------
ITS ONLY MY00
http://spaces.msn.com/members/bosaleh/
-----------------------------------------------------------------------------------
ITS ONLY MY00
http://spaces.msn.com/members/bosaleh/
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Originally Posted by bosaleh
You need new ECU I advice to you is ECUTEK its can control the 550cc even the 650cc but not higher
sorry totally disagree.
The Apexi is very good at controling idle.. I have Apexi PFC and 550s on my own car, it was a pig to get a nice idle on the previous ecu - Link, but the Apexi was no problem at all. It is one of the only (reasonable priced) ecus that alters the timing to keep the idle smooth.
It could be an injector fault or a mapping fault.
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
Sep 30, 2015 06:29 PM