what is cold cranking after oil change
#1
what is cold cranking after oil change
i havent been cold cringing the engine and have been told this can damage it
so how do i cold crank the engine?????
any help apreciated.
so how do i cold crank the engine?????
any help apreciated.
#3
Scooby Regular
iTrader: (9)
If your referring to doing your oil change ? Then disconnect the crank sensor fill up the oil filter and turn engine over until oil lights out.
Theres loads of threads on this just do a search.
Theres loads of threads on this just do a search.
Originally Posted by STI Craig
i havent been cold cringing the engine and have been told this can damage it
so how do i cold crank the engine?????
any help apreciated.
so how do i cold crank the engine?????
any help apreciated.
#4
Scooby Regular
Join Date: Apr 2003
Location: Location: Location:
Posts: 1,097
Likes: 0
Received 0 Likes
on
0 Posts
I am coming round to the opinion that cold cranking is not good for the engine. The oil light on mine (03WRX) does not go out when cold cranking. This is worrying when the oil pressure sensor triggers at 2.1PSI (very, very low). The forces involved in turning the engine over at such a low speed are also higher than spinning the engine at idle RPM.
Any other opinions before the next oil change?
Any other opinions before the next oil change?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM