powercrazed

I have bought one of these http://www.invoauto.co.uk/images/Pro...oncar1-lrg.jpg
It came with no fitting instructions. does it require new holes drilling or does it use any existing holes?

Thanks

Nathan

911

I think you will have the holes (tapped inserts) in the subframe, but not all the cars do (iirc)

This is the only mod I don't have on my Sti so would be interested to see if you really can notice a benefit.
You do have to ask why Subaru have the bracketry there on the subframe in the first place!

Let me know please.

Graham.

powercrazed

Should be fitting it this weekend so I will let you know how it goes.

Nathan

DeanF

iTrader: (1)

Fitted one of these to mine to finish off all the stiffening, There are holes existing, Mine just needed a Tap running up as they were well corroded MY94,
took 20 Mins, Did not really notice any further difference, but i think it would be hard to, having coilovers, solid droplinks, Uprated Arb's front & rear , Powerflex bushes, Upper front & rear Braces, Lower front & rear Etc
Dean