Jonesy1981

I've owned a 99 - T plate UK Impreza Turbo 2000 since december. I went to get a dump valve fitted and they told me its got a 98 Intercooler, nothing to worry about, its probably just a late registered 98 model. I tried to order the dump valve today and when i gave them the engine model no. they tell me that it ran from 93 - 96 on that number. The car was HPI'd etc before i bought it and nothing showed up from that, it was a very low mileage one.

As you can appreciate i'm now very very confused about my car and ANY help would be very much appreciated.

Thankyou in advance,

John.

Aztec Performance Ltd

iTrader: (234)

Does the engine number correspond to the log book and has it ever been changed?

93-96 engines are Phase 1 and look a bit different as they use 90deg turbo entry, slanted i/c etc.

Was it the main dealer who told you about the engine being different?

Jonesy1981

No, it was a performance garage that said it was a 1998. I've just spoken to Subaru UK who said its definitely a 1998 production so the engine will be the same, the i/c is flat with the body.. I'm still a bit confused with things. The engine and chassis numbers are the same on the log book as they are on the car. doesn't look like anythings been changed/manipulated or anything like that. Cheers for the suggestions to help though

RON

Might sound like a daft way to tell exactly what year the car was made, but does it have brake calipers on the front that have 'SUBARU' on them?? the 98's don't have them, the 99's do..... won't tell you if it's the right engine, but it'll help age the car.....
Might be worth posting a picture of the engine bay, there are a few subtl differences between the 98's and 99's, so a picture should be able to sort it out once and for all.


Ron.

Jonesy1981

I can post a picture if someone can tell me, in lamens terms, how to do it??


I have spoken to Subaru Uk who inform me its definitely a 98 Production car, it doesn't have the SUBARU calipers so definitely a 1998... Thanks for your help though

RON

Mail me the picture at impreza_dood@yahoo.co.uk and i'll post it up later if you like......

Midget

Well you wont have to worry about what engine you have if you fit a dump valve as within 3 to 6 months you will have an opportunity to replace it
(The engine that is )

STI Craig

^^^^eh what are u on about

how do dump valves cause the engine to blow up

r u sure u aint thinking of a bleed valve

Jonesy1981

Why will i have the chance to change the engine then? I was advised by several friends and a few garages that HKS BOV's don't cause any problems with the engine?

Should i expect problems then??

Jonesy1981

Thanks for the offer, if i have any more problems, i'll send you the picture to post up for me..

Cheers :-)

scoobfan

The guy was after some simple advice and you come out with sh*t like that !

Scooby Roo

What are you on about

Bob Rawle

If its a MY98 then thats not a phase 2, sounds as though thats what it is, model number will tell (on the aluminium id plate)

bob

Jonesy1981

Cheers for everyones help, just incase anyone was wondering though, the positives i've heard about HKS and BOV's on Impreza's, far outweighs the negatives and to be honest, loads of Subaru specialists (i know Scoobyworld only sell Bailey) but they wouldn't sell them if they had nothing but complaints about Dump Valves..


Thanks again

98prodrivewrs

Meaning what?