Wastegate test
#2
Connect a tube from the turbo outlet straight to the actuator(bypassing the boost solenoid) and then see what level the boost will get to on a run(im presuming you allready have a boost gauge)-this will show the operating pressure of the actuator, which is about 0.5 bar usually.
Gary
Gary
#3
Originally Posted by easyrider
Connect a tube from the turbo outlet straight to the actuator(bypassing the boost solenoid) and then see what level the boost will get to on a run(im presuming you allready have a boost gauge)-this will show the operating pressure of the actuator, which is about 0.5 bar usually.
Gary
Gary
Thread
Thread Starter
Forum
Replies
Last Post