fault codes-interpretation?
#1
Scooby Regular
Thread Starter
Join Date: Sep 2001
Location: london
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
uk99 fault codes-interpretation?
connected the 2 black connectors under the dash to check for fault codes
the check engine light flashed as follows;
long flash, short gap, long flash, followed by 2 quick flashes which i calculate to be 22 - am i correct?
code 22 is knock sensor
does this mean the actual knock sensor is faulty and i need to replace it with a new one
does anyone know the part no
or does it mean that the ecu has registered knock from the knock sensor and the sensor is in fact working??
the check engine light flashed as follows;
long flash, short gap, long flash, followed by 2 quick flashes which i calculate to be 22 - am i correct?
code 22 is knock sensor
does this mean the actual knock sensor is faulty and i need to replace it with a new one
does anyone know the part no
or does it mean that the ecu has registered knock from the knock sensor and the sensor is in fact working??
Last edited by yhe chod; 26 February 2005 at 08:53 PM.
#2
Scooby Regular
Join Date: Aug 2004
Location: Stirlingshire; Wrx type RA STi version 2 V-Limited; #097/555
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Yes that's 22.
If the ecu stores this then it means there has been an abnormal signal from that sensor i.e. a signal that is outside the expected range. Indicating a faultly sensor.
Or there is problem with the wiring from that sensor to the ecu.
If the ecu stores this then it means there has been an abnormal signal from that sensor i.e. a signal that is outside the expected range. Indicating a faultly sensor.
Or there is problem with the wiring from that sensor to the ecu.
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
Lighting and Other Electrical
20
27 September 2015 07:39 PM
Adam Kindness
ScoobyNet General
0
15 September 2015 03:31 PM