Moving PSR - Got wrong adaptor. Correct Part No Required
05 February 2005, 04:45 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 1999
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
Moving PSR - Got wrong adaptor. Correct Part No Required
After waiting 8 weeks for it I finally got the adaptor for moving my power steering reservoir and find that it's the wrong one 
I got the part nos from this thread http://bbs.scoobynet.co.uk/showthrea...1&page=4&pp=20 and all the rest of the parts seem fine (reservoir, bracket and hose) but instead of getting the bracket shown here http://images.fotopic.net/?id=668706 I got a light alloy one with one bolt hole and no provision for the belt guard. Also, the stub is at 90 degrees to the bolt hole so when fitted it points straight at the PS pulley. I ordered part 34431FE000 and that's what it says on the label so what's wrong and what is the correct part no please? Thanks.
Raymond (fed up...)
I got the part nos from this thread http://bbs.scoobynet.co.uk/showthrea...1&page=4&pp=20 and all the rest of the parts seem fine (reservoir, bracket and hose) but instead of getting the bracket shown here http://images.fotopic.net/?id=668706 I got a light alloy one with one bolt hole and no provision for the belt guard. Also, the stub is at 90 degrees to the bolt hole so when fitted it points straight at the PS pulley. I ordered part 34431FE000 and that's what it says on the label so what's wrong and what is the correct part no please? Thanks.Raymond (fed up...)
05 February 2005, 05:12 PM
#2
Scooby Regular
Join Date: Jan 2002
Posts: 4,056
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RaymondH
After waiting 8 weeks for it I finally got the adaptor for moving my power steering reservoir and find that it's the wrong one I got the part nos from this thread http://bbs.scoobynet.co.uk/showthrea...1&page=4&pp=20 and all the rest of the parts seem fine (reservoir, bracket and hose) but instead of getting the bracket shown here http://images.fotopic.net/?id=668706 I got a light alloy one with one bolt hole and no provision for the belt guard. Also, the stub is at 90 degrees to the bolt hole so when fitted it points straight at the PS pulley. I ordered part 34431FE000 and that's what it says on the label so what's wrong and what is the correct part no please? Thanks.
Raymond (fed up...)
I got the part nos from this thread http://bbs.scoobynet.co.uk/showthrea...1&page=4&pp=20 and all the rest of the parts seem fine (reservoir, bracket and hose) but instead of getting the bracket shown here http://images.fotopic.net/?id=668706 I got a light alloy one with one bolt hole and no provision for the belt guard. Also, the stub is at 90 degrees to the bolt hole so when fitted it points straight at the PS pulley. I ordered part 34431FE000 and that's what it says on the label so what's wrong and what is the correct part no please? Thanks.Raymond (fed up...)
The correct part number is:
Part number : 34431FE010 £17.75 +VAT as supplied by Steve at Oaken Subaru.
If the part number has changed Steve will keep you right on the correct part.
05 February 2005, 09:56 PM
#3
Scooby Regular
Thread Starter
Join Date: Jun 1999
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
Hi Scott.
Thanks for that. In the thread mentioned above you gave the part no as you have just quoted again but after that somebody had a problem and AndrewC came up with another one hence the confusion and me ordering the wrong one. Cheers
Raymond.
Thanks for that. In the thread mentioned above you gave the part no as you have just quoted again but after that somebody had a problem and AndrewC came up with another one hence the confusion and me ordering the wrong one. Cheers
Raymond.
Last edited by RaymondH; 05 February 2005 at 10:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM