advice
#1
Scooby Regular
Thread Starter
Join Date: Jul 2003
Location: stonehaven aberdeenshire
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
advice
1994wrx import
what would be the advantages of fitting 740cc injectors over 550cc ones
looking for 550cc blue tops as advised by fellow member but could not find any but have found 740,s
upgardes to fit
walbo pump and reg
apexi ecu
thanks
what would be the advantages of fitting 740cc injectors over 550cc ones
looking for 550cc blue tops as advised by fellow member but could not find any but have found 740,s
upgardes to fit
walbo pump and reg
apexi ecu
thanks
#3
Scooby Regular
Thread Starter
Join Date: Jul 2003
Location: stonehaven aberdeenshire
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stevebt
judging by the car spec it isnt even worth adding 550cc
as i was told i,m nearing the limit of the original ones
ta
#5
Scooby Regular
Thread Starter
Join Date: Jul 2003
Location: stonehaven aberdeenshire
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stevebt
how do you know you have maxed out your injectors??? need a big spec to run 740cc
with full decat pump etc didn,t want blow up anything as previous threads mods cost dosh and when they go bang cost even more
would like/wish to get near the 300bhp mark someday safely
ta
#7
Scooby Regular
Thread Starter
Join Date: Jul 2003
Location: stonehaven aberdeenshire
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stevebt
get your uprated fuel pump and reg on then get that apexi ecu mapped and it will be safe enough plus you can turn the fuel pressure up to get more out of your 380cc injectors, then you could decide if you need to go bigger
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Phil3822
General Technical
0
30 September 2015 06:29 PM