front driveshafts
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: from a land thats cold and wet
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
front driveshafts
can anyone tell me if i can take out the front drive shafts without loosening the bottom balljoint it looks possible to me but i don't want to start it and then find it won't come out that easy
92 leggy by the way
92 leggy by the way
#2
Scooby Senior
Join Date: Oct 2000
Location: Zurich, Switzerland
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
But separating the wishbone to strut balljoint is the easiest way of removing the driveshafts? You can then just pull back on the entire strut (once you've removed the retaining pin ) and the driveshaft will click out of the gearbox.
Richard
Richard
#3
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: from a land thats cold and wet
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
nah easiest way is to loosen the bolts holding the strut to the hub take out the top one and out comes the shaft
That way there are no scrapped knuckles or swearing
thanks anyway but job done
That way there are no scrapped knuckles or swearing
thanks anyway but job done
Thread
Thread Starter
Forum
Replies
Last Post