Hi,
I'm thinking of getting an apexi FC, AVCR, AFC, anyone got these units and how are they? What should I expect from this setup? Do I need an AFC to alter the A/F ratios, all advices appreciated, cheers

 

ive got the power FC ecu fitted to my MY98 STi type R and my only comment at the moment is that the car feels so much smoother through the rev range.It gets mapped on the road on sunday so hopefully i should see a massive improvement

 

Running Apexi PFC and AVC-R on mine (98 UK Turbo - with 'some' mods...)

quite happy thank you

Ran PE re-map previously, have to say happy with that at the time too - but this is more flexible for the 'constant modder' (Lets face it - I've only had it on for 3 months and I'm already trying to go further )

Mark

PS _ Don't think that you need the AFC if you have the full ECU - but AndyF is your man....

 

now there is alot of hardware your thinking of buying i would give the AFC a miss as i dont think you need it with the power fc plus you will have too many displays in the car i have defi gauges and below those is an AVCR and a commander , its starting to look a bit crowded the AVCR is a must but to have the AFC honestly its a pain trying to find places to mount them

 

I agree with above,Get intouch with Andy F.

He's the man for Apexi power fc's,and can supply a good TD05 turbo too.

 

i thought you were a LINK man i have got a power fc mapped by andy and its mint but PMSL

 

Would have been if certain suppliers could have given a deffinate answer at the time.
Yes I am a leg man myself

 

I should wait European Council to finish the negotiations with my country. Then we can make road tune with Andy.F (about 2015) =)

Meanwhile, does anyone know something about the datalogit? How does it work? Is it a software that does everything a power fc commander can or more abilities? Since there is no mapper or an Apexi excel dealer in Turkey I should do some "DIY" adjustments.

Thanks for all inputs.

 

Anyone?

Which powerfc should I order ? 414-F005 for 96/9~98/8 cars for EJ20K or 414-F001 for EJ20G? Here is the info of my car
-------------------
Bodymodel: GC8FL8D
Model Change: 97/07
Model Code: G10
Trim Code: 830
Body: S
Grade: GT
ENGINE: EJ20G
Destinat: G&E
----------------------
MY98 ECU information
9S
22611-AD200
A18-000-D32

Someone on this board suggested me to buy 414-F005 for EJ20K. Could someone confirm that please. Supplier dont know which will suit.

 

look at the loom of wiring that goes to your current ecu.
you can then download the apexi manual and in the back of that is a guide to all the ecus INCLUDING A PICTURE OF THE LOOM FOR EACH ONE.
that way you can match the loom arrangememnt to that in the apexi diagram.

I know that when I got mine (for a 99 car) it was two blocks of wires, a blank and another box of wires and that tied in with the diagram in the book.


Andy