fitting of FETD05 onto bugeye
07 September 2004, 02:28 AM
#1
fitting of FETD05 onto bugeye
hey guys, i should be recieving my converted TD05 soon, and as it will be going onto a bugeyed WRX, i would like to know if its just a straight swap of hoses and placement?? cheers for anyhelp you can provide
ScoobyDoo69
ScoobyDoo69
07 September 2004, 07:22 AM
#2
Scooby Regular
Join Date: May 2003
Posts: 3,139
Likes: 0
Received 0 Likes
on
0 Posts
need to remove some of the ally housing (inch blob on one side) for it to fit if not all ready done other wise straight swap
requires td05 water pipes as they are larger than the td04 if not already suplied with your turbo
requires td05 water pipes as they are larger than the td04 if not already suplied with your turbo
07 September 2004, 01:48 PM
#4
Scooby Regular
Join Date: May 2003
Posts: 3,139
Likes: 0
Received 0 Likes
on
0 Posts
turbo should come with all pipes but ask
the cool side of the turbo has a small lump of alley on one side this can hinder fitting as it touches the engine just needs cutting off
you can clearly see this in the picture on the right hand side above the actuator on the tdo5 compared to the td04 on the left
the cool side of the turbo has a small lump of alley on one side this can hinder fitting as it touches the engine just needs cutting off
you can clearly see this in the picture on the right hand side above the actuator on the tdo5 compared to the td04 on the left
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM