fitting of FETD05 onto bugeye
hey guys, i should be recieving my converted TD05 soon, and as it will be going onto a bugeyed WRX, i would like to know if its just a straight swap of hoses and placement?? cheers for anyhelp you can provide
ScoobyDoo69 |
need to remove some of the ally housing (inch blob on one side) for it to fit if not all ready done other wise straight swap
requires td05 water pipes as they are larger than the td04 if not already suplied with your turbo |
so do i get these water pipes from andy f when he sends it back? or will i have to source them myself? also by the ally housing do you mean the heatshield??
cheers ScoobyDoo69 |
turbo should come with all pipes but ask
the cool side of the turbo has a small lump of alley on one side this can hinder fitting as it touches the engine just needs cutting off you can clearly see this in the picture on the right hand side above the actuator on the tdo5 compared to the td04 on the left http://www.djfuz.com/tur1.jpg |
All times are GMT +1. The time now is 02:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands