Induction Kit on PPP 01 WRX?
06 August 2004, 10:35 AM
#1
Scooby Regular
Thread Starter
Induction Kit on PPP 01 WRX?
Hi all
I have seen some mention that if you add an induction kit to a car with an ecu upgrade you need it remapping.
Well I want an induction kit on mine and have a PPP
What needs to be done, if anything??
Eric
I have seen some mention that if you add an induction kit to a car with an ecu upgrade you need it remapping.
Well I want an induction kit on mine and have a PPP
What needs to be done, if anything??
Eric
06 August 2004, 10:46 AM
#2
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Id bin the idea of an induction kit, they can cause maf failures due to vibration and the fact that you take in hot air instead of cold air....
An STi panel filter (the only official STi/Subaru Japan approved item btw) is a good alternative and will probably give you better results, not cheap at 50 quid and needs changing every year but i gained over 10bhp and 15lbs of torque with one of these (MY03 JDM STi Spec C).
Tony
An STi panel filter (the only official STi/Subaru Japan approved item btw) is a good alternative and will probably give you better results, not cheap at 50 quid and needs changing every year but i gained over 10bhp and 15lbs of torque with one of these (MY03 JDM STi Spec C).
Tony
06 August 2004, 03:22 PM
#6
Scooby Regular
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by King Eric
Tony, thanks for that.
Wheres the best place to get one of these filters?
Wheres the best place to get one of these filters?
Good luck
Nick
P.S: I run a green air filter in mine as recommended by TSL (The cheapest place to buy these is from Demon Tweaks)
Thread
Thread Starter
Forum
Replies
Last Post
BackinBlack
Subaru Parts
4
13 September 2015 11:05 AM