jacking up the front
#1
Scooby Regular
Thread Starter
jacking up the front
I need to jack up the front of my MY01 WRX to have a look at something , but whats the best way to do it ?
I have a set of ramps but the car wont go on to them without it ripping off the front bumper. Is there anywhere I can safley use a trolley jack to lift up the front so I can slide the ramps underneath the wheels
cheers
Phil
I have a set of ramps but the car wont go on to them without it ripping off the front bumper. Is there anywhere I can safley use a trolley jack to lift up the front so I can slide the ramps underneath the wheels
cheers
Phil
#3
Scooby Regular
Thread Starter
Thanks Steve, I do have some axle stands but I wouldn't know a wishbone mounting point if it fell off and hit me on the head. Thanks for the towing eye idea though
Phil
Phil
#4
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Once its jacked up, look behine the front wheels, and the very lower part of whats behind it is the wishbone. It splits and goes to 2 places, one towards the engine, the other rearwards.
Follow it rearwards and see where it mounts, crudly underneath where the accelerator pedal is, but obviously underneath the car.
I use the wishbone points because the chasis is not strong enough for a axle stand to touch without damaging it.
Follow it rearwards and see where it mounts, crudly underneath where the accelerator pedal is, but obviously underneath the car.
I use the wishbone points because the chasis is not strong enough for a axle stand to touch without damaging it.
#5
Scooby Regular
Thread Starter
Thanks, I'll give it a go
I guess thats why its called a wishbone DOH, I really must get more clued up on the basics
Phil
It splits and goes to 2 places
Phil
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM