Johnny sti

Hi all
I have an auto meter oil press gauge and have been told you need to get a different socket bit to go in where the origional pressure switch goes. Its to big and hits the altonator.
I havent tried to fit it but if i remove the altonator altogether and fit the bits that come with the gauge, will it then hit the altonator or fit?
What i mean to say is, is the altonator always going to be in the way or does it not fit with it on but does if removed then fitted?

Sorry if i got you all lost!!

Johnny

skydiver

You must make an adapter to fit in there.
I have made an adapter and the sender is between the alternator and the power steering fluid pump. Its a little tricky to do it but it can place in there.

toxwaz

hi m8, had the same problem myself,u do need an adapter, i think i got mine from scoobymania[but any main autometer stockist i think] 4 £18 plus vat etc. hope it helps mark

EddScott

http://www.chiark.com/scooby/gauges_pressure.asp

Check this site out, I bought a hose from the company mentioned on this site. Did mine yesterday

Johnny sti

Thanks for the site.
He says that the electrical on wont fit, but mines mec.