Road Rager

What is the price of them???

and what settings will it make my 93wrx run at. i.e target psi, fuelcut psi, and bhp

Pavlo

£100 for board
£40 for fitting to wrx ecu

16.2psi target, 17.2psi fuel cut, approx 280 hp with decat (but standard top mount I/C)

Paul

Road Rager

can i have one please!!!!!!!!!!!!!!!

ive pmed you twice, im getting desperate, lol

Does that include a map for 97 ron?

also do you have to fit it or could i do it myself

martin850

iTrader: (51)

Sounds good how do I get one and what sort of power figure would I be looking at with an MY02 tmic and decat? Have mailed you but want one asap to sort out my fuelling. Would I still need an fcd with this chip?

Road Rager

fuel cut is set at 17.2 mate, and boost at 16.2, so it should all run fine

Ritch96

Pavlo,
is it possible to fit one to a uk my96? Was thinking of going down the dawes route but reckon this would be a better solution?

Cheers
Ritchie.

martin850

iTrader: (51)

So Road Rager you reckon that it is surplus to requirments? That should raise some cash towards the board.

Road Rager

well if the ecu is set at 16.2 psi, theres only a 1 psi between that and the fuel cut, if you gota a dawes you couldnt risk increasing it anyway, so i dont see the issue....

However, you could use the daves to turn the boost down if you really wanted to...

Johnny sti

I would also like a scooby ecu for my 93 wrx. Whats the best way of going about getting one? Please please please! The doreen has allowed me to get this but not a super chip

martin850

iTrader: (51)

Cheers Road Rager.

xiw2155

do they go onto a my97 ra and what power will it that have then as its 280bhp already standard

Delboy2

Won't fit a '97 M8 Scoobyecu is only for pre-96.

Cheers

Johnny sti

Still want one for my 93 wrx!!" whats the agreed output and how long must i wait for one?

Delboy2

E-mail Pavlo or David Wallis M8

St!

Hey all , Sorry to hijack the thread :|

I dont know if anyone can help , i recently purchased a HKS FCD K3 to increase the fuel cut. I have no idea how the wiring lies for this job. Does any have a Legacy ECU diagram? Or Know enough to help me intsall this ?

Many Thanks

Alex

taffy sparky

If i can have one for me my93 then e-mail me please also