mlite

Hello!

Will the NewAge Impreza (MY01/02) front and rear brakes(calipers, rotors, etc.) bolt-on to a Classic Impreza?

Thanks

Jolly Green Monster

iTrader: (4)

Fronts should slot straight on as long as your not on 15inch rims or something silly.

I think the rears should fit too but less sure.

I have front brakes off an STi7 on my classic but the rears on the STi are 2pot and won't fit without a fair amount of work (hubs, disks, caliper, drive shafts) but I believe the WRX has single pot vented disks which should bolt straight on.

JGM

ustolemyname??stevieturbo

iTrader: (1)

New model Front 4 pot Discs and Calipers bolt straight on.

For the 2 pot rears, you will need the rear hubs, discs, and calipers complete. other than that, it is a straight swap.

As JGM says, the rear Brembo STI setup is different and will require additional parts, or a lot more work. It is not a straightforward job.

mlite

Jolly Green Monster and ustolemyname??stevieturbo,

Does it mean that the front and rear hubs(with non-sti 2pots) of the NewAge Impreza are the same with the Classics?
Can you just bolt them on? (except for the STI which has different driveshafts?)

Jolly Green Monster

iTrader: (4)

I believe they are yes.

JGM