Notices

Big hesitation wrx my93

Thread Tools
 
Search this Thread
 
Old 01 February 2004, 02:08 PM
  #1  
Nick200
Scooby Regular
Thread Starter
 
Nick200's Avatar
 
Join Date: Nov 2002
Posts: 921
Likes: 0
Received 0 Likes on 0 Posts
Post

Help me please. I feels like the fuel isn't getting through, I thought it might be maff sensor but code check revealed nothing wrong anywhere?

Only happens down the revs once the revs are up its fine????

Anyone shed some light on this prob?

Cheers.
Old 01 February 2004, 06:27 PM
  #2  
moonraker
Scooby Regular
 
moonraker's Avatar
 
Join Date: Dec 2002
Location: Folkestone
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Post

Is it misfiring?? Could be plugs.
Also try cleaning the maf sensor, idle control valve and boost solenoid with carb cleaner. Do an ecu reset and see what happens!!

Si
Old 01 February 2004, 09:07 PM
  #3  
Nick200
Scooby Regular
Thread Starter
 
Nick200's Avatar
 
Join Date: Nov 2002
Posts: 921
Likes: 0
Received 0 Likes on 0 Posts
Post

Cheers m8, no its not backfiring I would clean the other parts if I new where they was m8

I know the maff sensors ok.
Old 02 February 2004, 08:53 AM
  #4  
GariYaRally
Scooby Regular
 
GariYaRally's Avatar
 
Join Date: Jul 2003
Location: AKA: AFRIKANZ - BRING BACK THE SAFARI RALLY!
Posts: 645
Likes: 0
Received 0 Likes on 0 Posts
Post

sounds like it might be a bent valve. Have you done a compression test on it ???
Old 03 February 2004, 07:53 AM
  #5  
jonny gav
Scooby Regular
iTrader: (1)
 
jonny gav's Avatar
 
Join Date: Mar 2002
Location: North East Subaru Forum
Posts: 3,920
Likes: 0
Received 0 Likes on 0 Posts
Default

sounds like the coil packs are breaking down, this is a common fault on pre 96 cars.
Old 03 February 2004, 09:21 AM
  #6  
timjohnson
Scooby Regular
 
timjohnson's Avatar
 
Join Date: Mar 2003
Posts: 628
Likes: 0
Received 4 Likes on 4 Posts
Default

had the same in my93 wrx ,spent a lot of money,coilpacks etc, turned out 2b leaking actuator,£35 2nd hand...job done!
Old 03 February 2004, 02:57 PM
  #7  
spiderbaby
Scooby Newbie
 
spiderbaby's Avatar
 
Join Date: Feb 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you use octane booster, If not give it a go , i also had a similar problem with my93 ,put the booster in whew.
Old 03 February 2004, 06:40 PM
  #8  
Nick200
Scooby Regular
Thread Starter
 
Nick200's Avatar
 
Join Date: Nov 2002
Posts: 921
Likes: 0
Received 0 Likes on 0 Posts
Default

I am running octane booster at the mo so it cant be that.

Its at scoobymania having spoilers and brakes fitted and I told them to find out what the problem is.

Lets see if they can fix the problem without it costing me a fortune.

Keep you posted.

P.s thanks for the advise I will pass it on.
Old 03 February 2004, 09:33 PM
  #9  
THOMO
Scooby Regular
 
THOMO's Avatar
 
Join Date: Jun 2001
Posts: 1,081
Likes: 0
Received 0 Likes on 0 Posts
Default

I WOULD ADVISE ANYONE WITH A 93 WRX TO GET A 94-95 WRX 260 BHP ECU BEST MOVE I MADE. SMOOTHER 20 BHP MORE NO HESITATION OR FLAT SPOTS.MERVE FROM POWER ENGINEERING (ECUTEK NOW) GAVE ME THIS TIP 5YRS AGO(£150) IS ABOUT THE GOING RATE FOR ONE.
Old 04 February 2004, 07:29 PM
  #10  
Nick200
Scooby Regular
Thread Starter
 
Nick200's Avatar
 
Join Date: Nov 2002
Posts: 921
Likes: 0
Received 0 Likes on 0 Posts
Default

I have been trying to find one for ages m8!!!!

P.s I found a breakers that sells them for 100 but they have never got any in stock!

Last edited by Nick200; 04 February 2004 at 07:30 PM. Reason: Addition
Old 05 February 2004, 01:57 AM
  #11  
muly
Scooby Regular
 
muly's Avatar
 
Join Date: Apr 2003
Location: Blackpool
Posts: 267
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Nick200
I have been trying to find one for ages m8!!!!

P.s I found a breakers that sells them for 100 but they have never got any in stock!

Try http://www.gradea-subaru.co.uk/ they had 2 in this week
Old 05 February 2004, 01:58 AM
  #12  
muly
Scooby Regular
 
muly's Avatar
 
Join Date: Apr 2003
Location: Blackpool
Posts: 267
Likes: 0
Received 0 Likes on 0 Posts
Default

ps - keep us posted if you get it sorted mate
Old 05 February 2004, 11:31 AM
  #13  
spiderbaby
Scooby Newbie
 
spiderbaby's Avatar
 
Join Date: Feb 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

how would you identify an ECU out of a 94-95 wrx. the code on my ecu is U8 what would the code on a 94-95 be?
Old 05 February 2004, 06:01 PM
  #14  
muly
Scooby Regular
 
muly's Avatar
 
Join Date: Apr 2003
Location: Blackpool
Posts: 267
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by spiderbaby
how would you identify an ECU out of a 94-95 wrx. the code on my ecu is U8 what would the code on a 94-95 be?

The code for the late 94 on will have a Z4 sticker on it, they are so much better
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
s_tubb23
General Technical
4
14 October 2015 07:58 PM
bugeyedom
General Technical
7
22 September 2015 04:30 PM
Bingerz1981
General Technical
1
15 September 2015 10:03 PM



Quick Reply: Big hesitation wrx my93



All times are GMT +1. The time now is 09:22 PM.