hi lads hope ye can help,my p1 takes about 4 seconds to start from cold and the same or longer when it is warm also when cold and revs left off at traffic lights etc engine stalls, any help greatly appreciated thanks

 

If running std ecu check for fault codes & go from there.
If not, i`d have a quick ckeck of the idle air speed control valve (just check it with a meter)
Last time i had bad starting amd stalling at junctions problems that was the cause. Replaced it an everything was peachy. BTW quite an expensive part so make sure that is the fault before you order a new one

 

so no other person had this trouble then