First off the wiring diagrams I have are not the right ones. and I have to have a page missing from my ECU pinouts or it is the wrong one also. My motor is a 93 JDM WRX.

In my ECU plugs the following pins are empty:
B43/ 1,14,16,18,and 20
B95/ 7,8, and 9
B96/ 14 and 15
B44/ 18 and 21

But the following pins have wires but no description on my pinout pages. I traced them to try and figure them out:
B43/5 O2 in downpipe
B43/12 cut so ?
B96/11 cut so ?
B44/16 followed it to ps pump

I think I am just missing the last page of my pinouts.

In my wiring diagrams none of the colors match up with what I have so it can't be right, for example:
MAF wires from left to right colors: W,BR,B,R
MAF diagram says: RB,G,BG,YL

So now I really don't feel comfortable going through and labelling my wires until I know I have the right diagrams and pinouts. If anyone can get me the right ones or shed some light on this feel free.

 

i always use this site

http://www.saxonfields.freeserve.co.uk/

its got a manual on it

regards
Rob

 

I looked over the wiring .pdf and it looks right but the ECU pinout in the diagnostic pdf still don't show the pins I am missing so I still need help there. Thanks a bunch for the link m8.