How to fit defis in a MY99 type R??
#2
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
Not much different than a 00 Uk turbo.
Here's where I stuck mine.
Pressure sensor
Temp sensor
also showing boost pressure sensor for good measure
EDIT : OOps ballsed the link up
Andy
[Edited by Fuzz - 1/4/2004 11:56:51 AM]
Here's where I stuck mine.
Pressure sensor
Temp sensor
also showing boost pressure sensor for good measure
EDIT : OOps ballsed the link up
Andy
[Edited by Fuzz - 1/4/2004 11:56:51 AM]
#4
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Teesside
Posts: 1,247
Likes: 0
Received 0 Likes
on
0 Posts
Cheers for the pictures Fuzz. Is the sensor in the first picture the pressure sensor behind the alternator? Also does the boost sensor not get too hot attached close to inlet manifold? Where did you get the adaptor from for your oil pressure sensor and does the temp one need an adaptor also?
Thanks for the help
Chris
Thanks for the help
Chris
#5
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
Pressure sensor is indeed behind the alternator (it replaces the OE sensor)
Boost sensor has been fine so far, inlet manifold does not get that hot.
Adapter for oil Pressure came with defi sensor.
Adapter for oil Temp I bought from Subaru (standard part) and it's exactly the same adapter that you can see at the bottom of the pressure sensor (not the shiny one).
(Part No. 11024AA210 plug-main gall)
Andy
[Edited by Fuzz - 1/4/2004 1:39:15 PM]
Boost sensor has been fine so far, inlet manifold does not get that hot.
Adapter for oil Pressure came with defi sensor.
Adapter for oil Temp I bought from Subaru (standard part) and it's exactly the same adapter that you can see at the bottom of the pressure sensor (not the shiny one).
(Part No. 11024AA210 plug-main gall)
Andy
[Edited by Fuzz - 1/4/2004 1:39:15 PM]
#6
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM