Does anyone have a link or instruction manuals on how/where to fit oil pressure and oil temp on an sti please??

Thanks in advance

Not much different than a 00 Uk turbo.

Here's where I stuck mine.
Pressure sensor
http://home.clara.net/andy.c/defioilpresssensor.jpg

Temp sensor
http://home.clara.net/andy.c/defioiltempsensor1.jpg

also showing boost pressure sensor for good measure :D

EDIT : OOps :o ballsed the link up


Andy

[Edited by Fuzz - 1/4/2004 11:56:51 AM]

Check your other post.
Alcazar

Cheers for the pictures Fuzz. Is the sensor in the first picture the pressure sensor behind the alternator? Also does the boost sensor not get too hot attached close to inlet manifold? Where did you get the adaptor from for your oil pressure sensor and does the temp one need an adaptor also?

Thanks for the help

Chris

Pressure sensor is indeed behind the alternator (it replaces the OE sensor)
Boost sensor has been fine so far, inlet manifold does not get that hot.
Adapter for oil Pressure came with defi sensor.
Adapter for oil Temp I bought from Subaru (standard part) and it's exactly the same adapter that you can see at the bottom of the pressure sensor (not the shiny one).
(Part No. 11024AA210 plug-main gall)



Andy


[Edited by Fuzz - 1/4/2004 1:39:15 PM]

This might give you some ideas on fittment too. :D

My defi fittment thread :D

Cheers for the pics and info Fuzz getting my defis next week so will have a go at fitting them now.

Thanks again, Chris