Im after a Defi centre pod and 3 defi gauges can anyone tell me where i can get a good deal or at least where to get them thx

 

http://www.scoobynet.co.uk/bbs/threa...hreadid=206827

 

Chris - YHM!

I was asking about them a while back, there's a few different types depending on whether you want to spend lots of just resonable amounts (for gauges anyway).

 

Which is better, electrical or mechanical guages?

I have seen some "Cheap" guages for oil pressure and temp, but they descirbe them as having 72" capillary tubes with 1/2"NPT(oil temp) and 1/8" or 1/4" NPT(for Oil pressure). Is this suitable or am I going to need some sort of adaptors? Where do they need to connect to?

BTW they are £25 +Vat for temp/pressure/Volts triple guage pack.
or just £20 +vat for pressure/temp double set.

 

Back Lit 12V Triple and . Double 2" Gauge Kits.

All Products - Tools and Maintenance - Car, Caravan and Boating Accessories - Dials and Gauges
--------------------------------------------------------------------------------




A range of triple and double electrical and mechanical gauges designed to monitor Voltage, Oil/Water Temperature, Oil Pressure and Amps. . CP01068 Oil Pressure/Water and Oil Temperature/Voltmeter Triple Gauge Kit: A combination electrical and mechanical, back-lit, 2" triple gauge kit which measures Oil Pressure between 0 100psi and 0 70 kg/cm2; Water/Oil Temperature between 100° 280°F and 40° 140°C; Voltage between 0 18 volts. The kit includes all the hardware required for mounting and installation (excluding hook-up wire). . CP01069 Water and Oil Temperature/Amps/Oil Pressure Triple Gauge Kit: A combination electrical and mechanical, back-lit, 2" triple gauge kit which measures Water and Oil temperature between 100° 280°F; Oil pressure between 0 100psi and 0 70 kg/cm2 and Amps between -60 0 +60. The kit includes all the hardware required for mounting and installation (excluding hook-up wire). . CP01070 Water and Oil Temperature/Oil Pressure Double Gauge Kit: A combination mechanical, back-lit, 2" double gauge kit which measures Water and Oil temperature between 100° 280°F and Oil pressure between 0 100psi and 0 70 kg/cm2. The kit includes all the hardware required for mounting and installation.. All the above kits are supplied with full instructions, mounting panels and full one year warranty..

Copied from the web site.