pch

Does anyone know where I can find a list of the OBD1 codes for my 94 Legacy GT Twin Turbo auto estate (Jap import). I have some listed in an american Haynes manual for standard Legacies, but no way of knowing if they are correct for my car.

Thanks!

Chris.Palmer

Check out the diagnostics section on my web site - check profile for details.

Chris

pch

Ta, found the site & printed out the codes, now to recheck on the car, & hope to get some indication of why it often goes into engine check mode when I welly it!

pch

Printed all the info from Chris's site (very useful) & managed to follow it OK, however codes showing 32 & 66(not listed).
I managed to clear the codes & reset ECU as per the instructions, however next time I wellied it all power goes & CEL light comes on with code 66.
As I believe this is sequential turbo, it seem sthat problem is when second turbo is blowing as seems smooth & powerful enough at lower revs & throttle openings.

Any answers??

PSI3

Have a look at the list from our website Psi3 Fault Codes
66 and 32 both listed.
simon

GTB Limited

Twin turbo codes can be found on

Twin Turbo Subaru

If thats any help.

Also check the 'legacyb4' on yahoo groups.
Someone else has the same problem


Mark

[Edited by GTB Limited - 2/17/2003 6:00:48 PM]

[Edited by GTB Limited - 2/17/2003 6:05:06 PM]

Chris.Palmer

Sorry I can't help any further.

I'll update my page to cover these faults.

Best of luck fixing it.

Chris