Samco Hose Fitting Instuctions
#1
Scooby Regular
Thread Starter
Yes I know!! I am a blundering oaf!!
Had my Samco hoses (turbo kit) delivered yesterday. It is obvious where 2 of them go, but could do with some piccies of some fitted or some instructions.
Alcazar - if you are out there and have done this, you know your install guides are masterpieces kissy kissy
Any help appreciated as it is far too cold for me to spend hours outside just getting the hump.
Had my Samco hoses (turbo kit) delivered yesterday. It is obvious where 2 of them go, but could do with some piccies of some fitted or some instructions.
Alcazar - if you are out there and have done this, you know your install guides are masterpieces kissy kissy
Any help appreciated as it is far too cold for me to spend hours outside just getting the hump.
#3
Scooby Regular
Is it the 3-piece kit for a UK MY99/00?
If so, should be Y-piece under Intercooler + little fat short one from Manifold (correct?) to Intercooler + Dumpvalve.
Stefan
If so, should be Y-piece under Intercooler + little fat short one from Manifold (correct?) to Intercooler + Dumpvalve.
Stefan
#4
Scooby Regular
Thread Starter
Sorry - it is the kit for MY00
Can't get any pictures on today, can you give it a go without?
Or does anyone else have pictures you could post instead.
Thanks
Can't get any pictures on today, can you give it a go without?
Or does anyone else have pictures you could post instead.
Thanks
#5
Scooby Regular
Have a look on Stephen Done's website http://www.steve.ukmail.org/car/ichoses.html
Are they the same ones in those pictures? What's the Samco part# - should be TCS143 for a UK MY00 turbo.
If it's these ones, then it's wrong as those are for STI's.
Stefan
Are they the same ones in those pictures? What's the Samco part# - should be TCS143 for a UK MY00 turbo.
If it's these ones, then it's wrong as those are for STI's.
Stefan
#6
Scooby Regular
Thread Starter
The kit has 4 pieces.
1 short fat and round - connects to the front of the intercooler, I guess. Total diameter 8cm.
1 about a cm longer, smaller diameter also round. 6cm total diameter 6cm length.
1 C shaped, longest and thinnest hose in kit and about 3.5 cm diameter.
1 L shaped, with a slight kink in it, similar diameter to the 2nd hose on list 6cm.
1 short fat and round - connects to the front of the intercooler, I guess. Total diameter 8cm.
1 about a cm longer, smaller diameter also round. 6cm total diameter 6cm length.
1 C shaped, longest and thinnest hose in kit and about 3.5 cm diameter.
1 L shaped, with a slight kink in it, similar diameter to the 2nd hose on list 6cm.
Trending Topics
#8
Scooby Regular
The C-shape one fits the Dumpvalve, the very short thick stubby one is of rthe IC->Manifold. The STI's have a metal Y-piece on the back of the IC, so they only need to two little short ones.
Your UK MY00 needs to replace the Y-Piece completely.
You could use the kit, but you'd need the metal Y-piece from an STI and that'll cost £150 new or slightly cheaper 2nd-hand. They're a bit like rocking horse **** though.
Where did you get the kit from?
Stefan
Your UK MY00 needs to replace the Y-Piece completely.
You could use the kit, but you'd need the metal Y-piece from an STI and that'll cost £150 new or slightly cheaper 2nd-hand. They're a bit like rocking horse **** though.
Where did you get the kit from?
Stefan
#10
Scooby Regular
Thread Starter
I got it from Rally Design. Have just got off the phone to them and they are sending the correct kit today.
Thanks for all the help.
Sccobyjawa - you're gonna miss it!!
Thanks for all the help.
Sccobyjawa - you're gonna miss it!!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM