ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Samco Hose Fitting Instuctions (https://www.scoobynet.com/general-technical-10/174755-samco-hose-fitting-instuctions.html)

7 Foot 06 February 2003 09:27 AM

Yes I know!! I am a blundering oaf!!

Had my Samco hoses (turbo kit) delivered yesterday. It is obvious :rolleyes: where 2 of them go, but could do with some piccies of some fitted or some instructions.

Alcazar - if you are out there and have done this, you know your install guides are masterpieces:D kissy kissy

Any help appreciated as it is far too cold for me to spend hours outside just getting the hump.

RICH WILD 06 February 2003 10:03 AM

What MY car is it.

It's very easy. Any chance you can put up a photo of the hoses you've got. It'll make describing them easier.

Cheers

Rich

ozzy 06 February 2003 10:07 AM

Is it the 3-piece kit for a UK MY99/00?

If so, should be Y-piece under Intercooler + little fat short one from Manifold (correct?) to Intercooler + Dumpvalve.

Stefan

7 Foot 06 February 2003 10:18 AM

Sorry - it is the kit for MY00

Can't get any pictures on today, can you give it a go without?
Or does anyone else have pictures you could post instead.

Thanks:)

ozzy 06 February 2003 10:26 AM

Have a look on Stephen Done's website http://www.steve.ukmail.org/car/ichoses.html

Are they the same ones in those pictures? What's the Samco part# - should be TCS143 for a UK MY00 turbo.

If it's these ones, then it's wrong as those are for STI's.

http://www.samcosport.co.uk/images/large/TCS144.jpg

Stefan

7 Foot 06 February 2003 10:28 AM

The kit has 4 pieces.

1 short fat and round - connects to the front of the intercooler, I guess. Total diameter 8cm.

1 about a cm longer, smaller diameter also round. 6cm total diameter 6cm length.

1 C shaped, longest and thinnest hose in kit and about 3.5 cm diameter.

1 L shaped, with a slight kink in it, similar diameter to the 2nd hose on list 6cm.

7 Foot 06 February 2003 10:30 AM

Oh sh1t!!!:(

They're the ones.

ozzy 06 February 2003 10:47 AM

The C-shape one fits the Dumpvalve, the very short thick stubby one is of rthe IC->Manifold. The STI's have a metal Y-piece on the back of the IC, so they only need to two little short ones.

Your UK MY00 needs to replace the Y-Piece completely.

You could use the kit, but you'd need the metal Y-piece from an STI and that'll cost £150 new or slightly cheaper 2nd-hand. They're a bit like rocking horse sh!t though.

Where did you get the kit from?

Stefan

ScoobyJawa 06 February 2003 11:01 AM

TCS 143 is the kit for MY99/00, can't believe how many suppliers are sending the wrong ones :rolleyes:

Pics of mine fitted here

7 Foot 06 February 2003 11:23 AM

I got it from Rally Design. Have just got off the phone to them and they are sending the correct kit today.

Thanks for all the help. :D

Sccobyjawa - you're gonna miss it!!
:D

ScoobyJawa 06 February 2003 12:01 PM

:( Don't say that!! Sure am :( ;)


All times are GMT +1. The time now is 03:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands