Notices
General Technical
Sponsored by:
Sponsored by: CARiD

ECU query,801

Thread Tools
 
Search this Thread
 
Old Jan 28, 2003 | 09:27 PM
  #1  
paul w's Avatar
paul w
Thread Starter
Scooby Regular
25 Year Member
 
Joined: Nov 1999
Posts: 1,092
Likes: 0
From: lincoln
Question

Hi there,

Just put 801 in and it feels no different,couple of questions.

Will the ecu run advance until it sees knock then retard or run to a ceiling and only retard if it sees knock,my knocklink saw nothing and i was expecting a bit of knock especially as the juice has been in the tank for 3 months due to lack of use.

Did it feel no different because i run a bit more boost and this masks out the benifits of the ecu.

Also i put the ecu in warmed it up on tickover,shut it down ,next day warmed her up on the road and hammered it to the test centre for its first mot and it was left running for 1/2 hour while they tested all the other stuff before the emissions,Should i reset it then take it for a blast straight away.

Thanks for any input.

Cheers Paul
Reply
Old Jan 28, 2003 | 09:42 PM
  #2  
john banks's Avatar
john banks
Scooby Regular
 
Joined: Nov 2000
Posts: 18,658
Likes: 1
From: 32 cylinders and many cats
Post

A 3-5% improvement is very subtle. Simple as that.
Reply
Old Jan 29, 2003 | 12:01 PM
  #3  
paul w's Avatar
paul w
Thread Starter
Scooby Regular
25 Year Member
 
Joined: Nov 1999
Posts: 1,092
Likes: 0
From: lincoln
Question

what about the other questions?

Cheers Paul
Reply
Old Jan 29, 2003 | 09:46 PM
  #4  
Floyd's Avatar
Floyd
Scooby Regular
25 Year Member
Liked
iTrader: (9)
 
Joined: Apr 2000
Posts: 5,471
Likes: 10
Post

I swapped an 801 into a MY00 car for someone and the difference was immediate. Are you sure you got an 801, or just the cover on an 802?

Have you got a Dawes already? You won't see the difference with a Dawes fitted IMHO.

F
Reply
Old Jan 31, 2003 | 01:40 PM
  #5  
paul w's Avatar
paul w
Thread Starter
Scooby Regular
25 Year Member
 
Joined: Nov 1999
Posts: 1,092
Likes: 0
From: lincoln
Post

Floyd,

I have a mbc fitted,i'm pretty sure its the 801 as the screws haven't been touched and the front and back have the same stains,markings.Will try it with standard boost control.

Cheers Paul
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
ALEXSTI
General Technical
5
Sep 28, 2015 09:29 PM
Ozne
General Technical
2
Sep 27, 2015 03:06 PM




All times are GMT +1. The time now is 02:59 AM.